سلك فك لحام (سولدر ويك) ميكانيك موديل: R300 عرض 1.5 مم طول 1.5 متر

The MECHANIC R300 Solder Wick is a precision desoldering tool designed for efficient removal of excess solder from printed circuit boards (PCBs).With a width of 1.5mm and a length of 1.5 meters, it is well-suited for various electronic repair tasks, including surface-mount device (SMD) rework and through-hole component desoldering.

🔧 Key Features

• 
  

  High-Quality Copper Construction
  Crafted from pure copper strands, ensuring excellent thermal conductivity and rapid heat transfer for effective solder absorption.

  
  


• 
  

  Pre-Fluxed Braid
  The braid is pre-treated with flux, enhancing its solder-wicking capabilities and reducing the need for additional flux application.

  
  


• 
  

  Anti-Oxidation Treatment
  Specially treated to resist oxidation, prolonging shelf life and maintaining performance over time.

  
  


• 
  

  Flexible and Durable Design
  The braid's flexibility allows it to conform to various components and PCB layouts, while its durability ensures consistent performance during repeated use.

  
  

📐 Specifications

• 
  

  Model: R300

  
  


• 
  

  Width: 1.5 mm

  
  


• 
  

  Length: 1.5 meters

  
  


• 
  

  Material: Pure copper with flux coating

  
  


• 
  

  Weight: Approximately 8 grams

  
  


• 
  

  Color: Copper

  
  

🛠️ Applications

• 
  

  PCB Repair and Rework: Ideal for removing solder from pads, traces, and component leads during repair or replacement.

  
  


• 
  

  SMD Component Desoldering: Effectively removes solder from fine-pitch SMD components without damaging pads.

  
  


• 
  

  Through-Hole Component Removal: Assists in clearing solder from through-hole joints, facilitating component extraction.

  
  


• 
  

  General Electronics Maintenance: Useful for correcting solder bridges, cleaning up excess solder, and preparing surfaces for new soldering.

  
  

✅ Usage Instructions

1. 
   

   Preparation: Ensure the soldering iron tip is clean and properly tinned.

   
   


2. 
   

   Placement: Position the solder wick over the solder to be removed.

   
   


3. 
   

   Heating: Place the heated soldering iron tip on top of the wick, allowing heat to transfer through the braid to the solder joint.

   
   


4. 
   

   Solder Absorption: As the solder melts, it will be drawn up into the braid.

   
   


5. 
   

   Removal: Once the solder has been absorbed, remove both the iron and wick simultaneously.

   
   


6. 
   

   Trimming: Cut off and discard the used portion of the wick; repeat the process as needed with a fresh section.