الرئيسية
المتجر
PCB وبروتوتايب
محلول طلاء فضي للوحات الإلكترونية 125 مل

شارك المنتج

1 / 4

PCB وبروتوتايب

محلول طلاء فضي للوحات الإلكترونية 125 مل

Name: محلول طلاء فضي للوحات الإلكترونية 125 مل
SKU: 54810
Price: 155.00 EGP
Availability: InStock

☆☆☆☆☆ 0.0 (مفيش تقييمات) رمز المنتج: 54810

155 ج.م

متوفر

الكمية:

اسألنا - نرد عليك على واتساب

يوصلك خلال 72 ساعة

دفع آمن. نقبل: بطاقة بنكية محفظة إلكترونية الدفع عند الاستلام إنستا باي

يُشترى معاً عادةً

هذا المنتج

محلول طلاء فضي للوحات الإلكترونية 125 مل

155 ج.م

الإجمالي

750 ج.م

الوصف المواصفات التقييمات (0) الأسئلة الشائعة (0)

عن هذا المنتج

Silver Plating Solution 125mL for Electronic Boards

The solution is suitable for plating the copper tracks in electronic circuit by immersion without electricity (Electroless), as a very thin layer of silver is deposited on it in a short time at room temperature, to improve the quality of PCBs used in industry, making engineering projects, tech prototypes for students, technicians and specialist engineers in the field of electricity and electronics, as well as hobbyists.

The solution is safe and suitable for using in the laboratory or at home, by following simple tech steps for plating one or more PCBs so it saves time and cost.

Features:

• Protect PCB from corrosion and high temperature.

• Enhanced electrical conductivity.

• Great solderability for PCB.

• Strong and shiny PCB tracks.

• Very easy electroless plating.

• 125mL is enough for plating a PCB up to 600 sq. cm in less than 100 seconds at the rom temperature of (20 to 30 Celsius).

Usage:

• Manufacturing of electronic boards and photoresist PCB.

• Plating of copper artifacts and works art.

Usage Recommendations (very important):

1-Preparing a suitable plastic container for PCB size.

2-Clean PCB with a soft steel wool grade 0000 (the copper should be quite shiny and oxide free).

3-Rinse with warm water (don't touch PCB copper tracks).

4-Put PCB in the container (the copper tracks is up).

5-Pour the solution until the PCB is fully covered and wait for 100 Sec Max.

6-Rinse PCB with water after plating.

7-To polish the plating layer, use a soft sponge saturated with a sodium bicarbonate solution (add 2 teaspoons of sodium bicarbonate powder to 50 ml of water).

8-Dry PCB.

Notes:

• For best results, follow the usage recommendations.

• The solution temperature is recommended to be from 20 to 30 celsius.

• Keep the bottle tightly closed after using to preserve the solution from oxidation.

• Do not refill the used solution on the solution remained in the bottle.

• The board can be polished using a soft sponge moistened with a solution of sodium bicarbonate (to prepare the solution, dissolve a teaspoon of sodium bicarbonate in a quarter cup of water).

• This silver plating solution is similar to tinning solution.

Safety Precautions:

• Wearing plastic gloves is recommended when using.

• Close after using & keep away from children.

• Use enough water when eyes or wounds are touched.

Appearance:

The solution is a transparent liquid packaged in a plastic bottle - net capacity 125mL.

Thanks for your trust

المواصفات التقنية

لسه مفيش مواصفات مسجلة

بنسجل المواصفات التقنية للمنتج ده وهتظهر هنا أول ما تخلص.

التقييمات

0.0 ☆☆☆☆☆ لسه مفيش تقييمات

5★ 0

4★ 0

3★ 0

2★ 0

1★ 0

لسه مفيش تقييمات للمنتج ده

كن أول واحد يقيّمه وتساعد اللي بعدك يقرر.

الأسئلة الشائعة

لسه مفيش أسئلة على المنتج ده

أول ما توصلنا أسئلة متكررة على المنتج ده هنجاوب عليها هنا.

مش لاقي إجابتك؟ اسألنا - نرد عليك على واتساب

★★★★★ (0)

55 ج.م

155 ج.م

متوفر - يوصلك خلال 72 ساعة